How to Use

1. The cold water method

1.1 Clean - Wash bottles, teats and breastfeeding equipment in warm soapy water, then rinse in cold water

1.2 Prepare Solution - Fill Combi to the 5L fill line with cold tap water, then add 1 standard Milton Sterilising Tablet.

1.3 Add Items - Close the lid and in just 15 minutes everything is ready to use. Keep items in the solution until you need them and replace after use to sterilise again. You can add and remove items until the solution needs renewing after 24 hours

2. The microwave method

2.1 Clean - Wash bottles, teats and breastfeeding equipment in warm soapy water, then rinse in cold water

2.2 Fill - Pour exactly 200 ml of water into the Milton Combi base

2.3 Load - Load bottles with the opening facing down, screw the lid on, then press the safety vent down

2.4 Microwave - 2 mins at 1100-1850W; 4 mins at 850-1000W; 6 mins at 500-800W